User's Manual

23
Work Hours
This will allow you to program the start time for the working hour.
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the Work Hours sub-menu.
2. Press Select soft key to enter the menu.
3. Use the touch-tone pad to set the time, and use AM/PM soft key to
select AM or PM.
4. Press the Select soft key to save the time.
5. Use the VOL (- or +) button to select Yes or No for the Announce Only.
6. Press the Select soft key to save your selection and Saved shows in the
display.
NOTE: If you select Yes for Announce Only, the unit will hang up the call after
announce the greeting when answering the call in answering mode.
After Hours
This will allow you to program the start time for the after work hour.
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the After Hours sub-menu.
2. Press Select soft key to enter the menu.
3. Use the touch-tone pad to set the time, and use AM/PM soft key to
select AM or PM.
4. Press the Select soft key to save the time.
5. Use the VOL (- or +) button to select Yes or No for the Announce Only.
6. Press the Select soft key to save your selection and Saved shows in the
display.
NOTE: If you select Yes for Announce Only, the unit will hang up the call after
announce the greeting when answering the call in answering mode.
Config OGA
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the Config OGA sub-menu.
2. Press Select soft key to enter the menu.
3. Use left and right button to toggle between Line 1 and Line 2 and use
VOL (- or +) button to scroll to your selection.
4. Press the Select soft key to save your selection. If there is not any
message recorded in your selected greeting is, EMPTY shows in the
display and you should select another one. Otherwise, Saved shows in
the display.
Programming the Telephone