User's Manual

22
Ring Delay
This feature lets you select the number of times you want the phone to ring
before the answering system answers a call.
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the Ring Delay sub-menu.
2. Press Select soft key to enter the menu.
3. Use the VOL (- or +) button to scroll to your selection, from 2 rings to 6
rings or toll saver, and use the DIR or CID button to toggle between L1
and L 2.
4. Press the Select soft key to save your selection and Saved shows in the
display.
NOTE: When the Toll saver is selected, the unit will answer the incoming call
after 3 rings if there is new message. Otherwise, the unit will answer the
incoming call after 5 rings.
Message Length
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the Message Length
sub-menu.
2. Press Select soft key to enter the menu.
3. Use the VOL (- or +) button to scroll to your selection, from 1 to 3
minutes, and use the DIR or CID button to toggle between L 1 and L 2.
4. Press the Select soft key to save your selection and Saved shows in the
display.
Call Screening
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the Call Screening sub-menu.
2. Press Select soft key to enter the menu. Use the VOL (- or +) button to
select On or Off.
3. Press the Select soft key to save your selection and Saved shows in the
display.
Remote Password
You can access the answering system from a tone dialing telephone in
another (remote) location. The security code is required for remote access,
and it prevents unauthorized access to your answering system.
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the Remote Password
sub-menu.
2. Press Select soft key to enter the menu. The current Remote password
000 shows in the display.
3. Use the touch-tone pad to enter your 3-digit security code.
4. Press Select soft key to save the setting.
Programming the Telephone