User's Manual

20
Ring Volume
There are 5 volume levels and OFF for your selection. The Ring volume can
be set individually for each line.
From the Setup HS Menu:
1. Press the VOL (- or +) button to scroll to the Ring Volume sub-menu.
2. Press Select soft key to enter the menu.
3. Use the VOL (- or +) button to scroll to your selection and use the DIR
or CID button to toggle between L 1 and L 2. The default setting is
VOL 3.
4. Press Select soft key to save your selection and Saved shows in the
display.
Key Tone
From the Sound Setting Menu:
1. Press the VOL (- or +) button to scroll to the Key Tone sub-menu.
2. Press Select soft key to enter the menu. Use the VOL (- or +) button to
select On or Off.
3. Press Select soft key to save your selection and Saved shows in the
display.
Answer System
1. Make sure your phone is OFF (not in talk mode).
2. Press the Menu soft key on BS to go to the main menu.
3. Press VOL (- or +) button to scroll to Answer Sys.
4. Press Select soft key to confirm. You may program the following items
in base: Message Alert, OGA Playback, OGA Record, Answering System,
Ring Delay, Message Length, Call Screening, Remote Password, Work
Hours, After Hours and Config OGA.
Message Alert
This feature set your answering system to give an alert tone every 10
seconds when there are new messages.
From the Answer System Menu:
1. Press the VOL (- or +) button to scroll to the Message Alert sub-menu.
2. Press Select soft key to enter the menu. Use the VOL (- or +) button to
select On or Off. Default is Off.
3. Press the Select soft key to save your selection and Saved shows in the
display.
Programming the Telephone