User's Manual

Handset Name (only applicable for handset)

From the Phone Setting Menu:

1. Press the VOL (- or +) button to scroll to the Handset name sub-menu.

2. Press Select soft key to enter the menu. The default setting is

Handset xx.

3. Use the touch-tone pad to enter a name (up to 13 characters). More

than one letter is stored in each of the number keys. For example, to

enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3

times for the letter I. Press the 5 key 3 times for the letter L. Press the 5

key 3 times for the second letter L, and press the 1 key to insert a space

between the ﬁrst and last name. Press the 7 key 4 times for the letter

S; press the 6 key once for the letter M; press the 4 key 3 times for the

letter I; press the 8 key for the letter T; press the 4 key twice for the

letter H.

NOTE: If you make a mistake, press CID/VOL (- or +) button to move the

cursor forward or backward, and then use the mute/del button to backspace

and delete one character at a time.

NOTE: To avoid confusion, * key is a function key to switch/toggle between

the upper case & low case of characters during text edit.

4. Press the Menu button to save your name. You will hear a conﬁrmation

tone and the display shows Saved.

Registration

A cordless handset will not operate until it is registered to the base. During

the registration process, keep the handset near the base. Up to 10 cordless

handsets can be registered to one base.

NOTE: If a handset is not registered; Not Register ﬂashes on the display and

if the Talkbutton on the handset is pressed, it will display Unavailable.

From the Phone Setting Menu:

1. Press the VOL (- or +) button to scroll to the Registration sub-menu.

2. Press Select soft key to enter the menu and you may program the

following items: Register and Remove handset.

From the Registration Menu:

1. Press the VOL (- or +) button to scroll to the Register sub-menu.

2. Press Select soft key to enter the menu. “Press base unit page button

until beep” shows in the display

3. Press and hold the Page button on base for 5 seconds.

4. “Registration” displays in shows the base is in registration mode.

5. If the registration is successful, the handset shows Registration

complete for 2 seconds and emits a conﬁrmation tone.

5. If the registration is failed (i.e. timeout), the handset shows

“REGISTRATION FAILED!” for 2 seconds and then returns to the idle

mode base and emits an error tone.

Programming the Telephone