Manualshelf

User's Manual

ManualsBrandsThomson ManualsAudio EquipmentDECT 6.0 CORDLESS TWO LINE PHONE W/ ITAD SPEAKERPH
11121314151617181920
16
Dial Mode
The Dial Mode of Line 1 and Line 2 can be set separately.
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to the Dial mode sub-menu.
2. Press Select soft key to enter the menu.
3. Use the VOL (- or +) button to select Tone or Pulse and use the DIR or
CID button to select L1 or L2.
4. Press Select soft key to save your selection and Saved shows in the
display.
NOTE: The Dial mode only can be set in the base menu.
Room Monitor
If the room monitor is set to “On” in this handset, for example handset #1,
when a handset or a base makes an intercom call to HS#1, the HS#1 will
answer the call and go to room monitor mode. The microphone of HS#1
will be on, but the speaker is kept to Off.
From the Phone setting menu:
1. Press the VOL (- or +) button to scroll to the Room Monitor sub-menu.
2. Press Select soft key to enter the menu and use the VOL (- or +) button
to scroll to your selection. The default setting is Off.
3. Press Select soft key to save your selection and Saved shows in the
display.
Area Code
The telephone uses the pre-programmed area code to determine the
number format to display when a valid Caller ID record is received. The
pre-programmed area code is also used for the Dialback feature.
From the Phone setting Menu:
1. Press the VOL (- or +) button to scroll to the Area code sub-menu.
2. Press Select soft key to enter the menu. Enter area code shows in the
display.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press Select soft key to save your selection and Saved shows in the
display.
2nd Call Alert
If it is set to On, you will hear the alert tone when you are in conversation
and there is an incoming call from another line
From the Phone Setting Menu
1. Press the VOL (- or +) button to scroll to 2ND Call Alert sub-menu.
2. Press Select soft key to enter the menu. Use the VOL (- or +) button to
scroll to your selection. The default setting is On.
3. Press Select soft key to save your selection and Saved shows in the
display.
Programming the Telephone