Manualshelf

User's Manual

ManualsBrandsThomson ManualsAudio EquipmentDECT 6.0 CORDLESS TWO LINE PHONE W/ ITAD SPEAKERPH
11121314151617181920
15
Date/Time
From the Phone Setting Menu
1. Press the VOL (- or +) button to scroll to Date/Time sub-menu.
2. Press Select soft key to enter the menu. Year 2007 shows in the display.
3. Use the touch-tone pad to enter the last two digits of the current year
(range: 00 to 99).
4. Press Select soft key to save the year setting and proceed to date
setting.
5. Date 01/01 shows in the display. Use the touch-tone pad to enter two
digits for current month and day respectively.
6. Press Select soft key to save the month/date setting and proceed to
time setting.
7. Time 12:01p shows in the display. Use the touch-tone pad to enter four
digits for current time and use soft key AM/PM to toggle between “P”
(pm) and “A” (am).
8. Press Select soft key to save the setting. Saved shows in the display.
NOTE: If you subscribe to Caller ID service, the current Date/Time is set
automatically when you receive your first CID record and will override
manually set Date/Time.
NOTE: The Date/Time setting item only exists in base menu, handset Date/
Time should update automatically after it is set in the base.
Auto Answer (only applicable for handset)
This option allows you to pick up the handset from base to answer an
incoming call without pressing the Talk/Speaker/L 1/L2 button.
When it is set to off, this function is disabled in this handset.
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to the Auto Answer sub-menu.
2. Press Select soft key to enter the menu. Use the VOL (- or +) button to
scroll to your selection. The default setting is On.
3. Press Select soft key to save your selection and Saved shows in the
display.
Auto Answer Intercom
If it is set to on, this handset or base will auto answer the intercom call
when it receives an intercom call.
From the Phone Setting Menu
1. Press the VOL (- or +) button to scroll to Auto Answer Int. sub-menu.
2. Press Select soft key to enter the menu. Use the VOL (- or +) button to
scroll to your selection. The default setting is Off.
3. Press Select soft key to save your selection and Saved shows in the
display.
Programming the Telephone