User's Manual

14
Programming the Phone
Standby Screen
The handset displays the handset name, date, time, and battery status and
the three soft keys.
The base displays the current date, time and the three soft keys.
NOTE: The three soft keys will change according to the status of the unit.
Programming Functions
The system uses a menu structure to give you access to all of the built-in
features. You may program the following items in main menu: Phone
Setting, Display Setting, Sound Settings, Answering System and Load
Default.
NOTE: During programming, you may press the back Soft key (left) at any
time to exit the sub-menu and return to the main menu, or press Exit key to
exit programming and return to standby screen.
NOTE: If no key is pressed for 30 seconds, the handset will automatically exit
programming and return to standby screen.
Phone Setting
1. Make sure your phone is OFF (not in talk mode).
2. Press the Menu button on HS or the Menu left soft key on BS to go to
the main menu.
3. Press VOL (- or +) button to scroll to Phone Setting.
4. Press Select (right soft key) to confirm and you may program the
following items:
Date/Time (base only),
Auto Answer (handset only),
Auto Answer Intercom (both base and handset),
Dial mode (base only),
Room Monitor (both base and handset),
Area Code,
Registration (handset only),
De-registration (Base only),
2nd Call Alert (Both base and handset),
Handset Name (handset only).
Programming the Telephone