User's Manual
Table Of Contents
- Table of Contents
- Table of Contents 4
- Introduction
- Telephone Features
- Your Caller ID Call Waiting Telephone Allows You to
- Connections and Set Up
- Base and Handset Layout
- Parts Checklist
- Modular Jack Requirements
- Digital Security System
- Important Installation Information
- Important Installation Guidelines
- Installing and Replacing the Base Backup Battery
- Battery Safety Instructions
- Installing the Phone
- Data Port
- Handset Registration
- Base
- Displays and Display Messages
- Setting Up the Telephone
- Display Language
- Ringer Volume
- Intercom Ring
- Ringer Type
- Rings to Answer (Base Only)
- Mailbox Password
- Day and Time
- Prime Line
- Area Code
- Hold Reminder
- Registering an Additional Handset
- Reset Handset and Base
- Handset De-Registration
- Base De-Registration
- Unit Capabilities
- How Many External Calls and Intercom Calls Can Be Conducted Simultaneously and By How Many Users?
- Answering a Call
- Base Speakerphone
- Handset Speakerphone
- Headset
- Cordless Handset
- Making a Call
- Handset Speakerphone
- Base Speakerphone
- Headset
- Cordless Handset
- Volume
- Handset Speakerphone
- Handset Receiver
- Paging All Handsets
- Hold
- Placing an Outside Call on Hold (Single line)
- Placing a Conference Call on Hold (Both Lines)
- Auto Hold/Intercom
- Hold Reminder
- Hold Recall Ring
- Flash
- Pause
- Out of Range Warning
- Battery Low Warning
- Exit
- Mute
- Using Another Line During a Conversation
- Base
- Cordless Handset
- Redial
- Speakerphone
- Headset
- Cordless Handset/Speakerphone
- Base Speakerphone
- Headset
- Memory
- Reviewing Records in Directory Memory
- Storing Names and Number in Directory Memory
- Editing Records Stored in Directory Memory
- Deleting Records from Directory Memory
- Dialing a Number Stored in Directory Memory
- Chain Dialing from Memory
- Intercom Basics
- Making Intercom Calls with the Base
- Making Intercom Calls with a Handset
- Using Intercom with External Calls
- Answering Intercom Calls
- Transferring a Call
- Transferring An Outside Call Through Intercom
- Conference Call Basics
- Conference Call
- Conferencing Through Intercom
- Three-way Conferencing with External Calls
- Caller ID (CID)
- Call Waiting Caller ID
- Caller ID (CID) Database
- Reviewing CID Records
- Caller ID Display Icons
- Reviewing CID Records
- Deleting a CID Record
- Deleting All CID Records from the CID Database
- Dialing A CID Record
- Transferring A CID Record To Directory Memory
- Call Waiting Caller ID Deluxe
- Answering Machine and Mailbox Operation
- Turning the answerer on – LINE 1
- Turning the answerer Off - LINE 1
- Answerer On/Off Indicator
- Turning On/Off the Answerer - Line 2
- Recording a Personal Mailbox Greeting
- Line 1
- Deleting Your Personal Greeting – Line 1
- Rings To Answer
- Setting the Mailbox Password
- Day and Time Setup
- Recording an Incoming Message
- Answering and Recording Incoming Calls
- Screening Calls
- Message Indicators
- Base
- Handset
- Playing Incoming Messages
- Memo Messages (Base Only)
- Recording a Memo Message
- Playing Memo Messages
- Erasing Memo Messages
- Remote Operation
- From Any Touch-tone Phone
- Memory Full
- Connecting an Optional Headset to the Cordless Handset
- Connecting the Belt Clip to the Handset
- Troubleshooting Tips
- Base Unit
- Cordless Handset
- Voice Mail System/Answering System
- Causes of Poor Reception
- Other Information
- General Product Care
- Service
- Other Information
- Limited Warranty
- Index
- Index
- A
- B
- C
- Call Waiting Caller ID
- Call Waiting Caller ID Deluxe
- Caller ID (CID)
- Caller ID (CID) Database
- Caller ID Display Icons
- Causes of Poor Reception
- Chain Dialing from Memory
- Conference Call
- Conference Call Basics
- Conferencing Through Intercom
- Connecting an Optional Headset to the Cordless Handset
- Connecting the Belt Clip to the Handset
- Connections and Set Up
- Cordless Handset
- Cordless Handset/ Speakerphone
- D
- E
- F
- G
- H
- I
- L
- M
- O
- P
- R
- S
- T
- Telephone Features
- Telephone Operation
- Three-way Conferencing with External Calls
- Transferring a Call
- Transferring A CID Record To Directory Memory
- Transferring An Outside Call Through Intercom
- Troubleshooting Tips
- Turning On/Off the Answerer - Line 2
- Turning the answerer Off - LINE 1
- Turning the answerer on – LINE 1
- U
- V
32
Telephone Operation
Pause
Use the #PAUSE button to insert a delay in the dialing sequence of a telephone number you want to store in
memory (for example, when you must dial 9 to get an outside line, or when you must enter codes to access
your bank’s information line). Pause is displayed as “ P.”
NOTE: You may add more than one pause if a longer delay is needed.
Out of Range Warning
When using your cordless handset, if you move too far away from the base, you will hear a long warning tone,
and the display shows OUT OF RANGE. This means you are out of range of the base, and you may loose the
link between your handset and base. You must move closer to the base.
Once you move within range of the base, the warning tone stops and the display returns to normal.
If you do not move into base range within 30 seconds, the handset looses its link with the base, and the base
automatically puts your call on hold. NO LINK TO BASE shows in the display.
Battery Low Warning
When the battery voltage level is low, LOW BATTERY shows in the display, and you will hear a warning beep. If
you are on the phone when the battery gets low, you will hear the warning beep every 15 seconds. Finish your
call as soon as possible; otherwise your call is put on hold after approximately five minutes and is
disconnected. You will need to use another handset to retrieve the call.
Exit
You may press the FLASH/EXIT button any time to exit the current operating mode.
Mute
Use the mute feature to turn off the microphone so you can have a private, off-line conversation.
1. During a phone call, press the MUTE button. The mute indicator light turns on.
2. To reactivate the microphone, press MUTE again.
Using Another Line During a Conversation
Base
1. If you are using LINE 1 and you receive a second call on another line, or want to make another call, press
the HOLD button to put the first call on LINE 1 on hold. The LINE 1 indicator light flashes slowly, and the
display shows LINE 1 ON HOLD.
2. Press the LINE 2 button make another call or answer a second call. The LINE 2 indicator turns on.
NOTE: If you are engaged in a call and you receive a second call on another line, you will hear the call waiting ringer from the speaker.
3. To return to LINE 1 and disconnect LINE 2, press the LINE 1 button.
OR