Operation Manual

EN 3
Source
To select connected devices.
Standby / quit standby.
0-9
To select a channel, page or setting.
ECO
To select desired power saving mode.
Guide
To toggle the Electronic Programme
Guide on or off (only available for digital
channels).
Menu
To access the main menu; to return to the
previous menu.
Exit
To exit the menu structure or Teletext.
To navigate in the main menu; to select
menu options; to switch to the previous or
next photo, song or video in USB function.
/*Zoom+/-
To navigate in the main menu; to set
functions and change values. ► can
also be used to open the corresponding
submenu.
* To select the picture format.
Note: You are recommended to use the full
screen mode. Do not use the display mode
with black bars on both sides of the picture
(such as 4:3) for long time, otherwise the
TV screen may be damaged permanently.
OK
To open the corresponding submenu and
activate a setting in menus; to freeze/
Getting started
Important:
Battery shall not be exposed to excessive heat such as sunshine, re or the like. If the batteries in your remote
control are run down you can use the buttons on your TV set. In TV mode, they have the same functions as the
corresponding buttons on the remote control. In the menus they have the following functions:
For models with OK button on the set: For models without OK button on the set:
PR+ or PR ▲ ▲ PR+ or PR ▲ ►
PR- or PR ▼ ▼ PR- or PR ▼ ◄ & OK
VOL+,
+ or VOL ► ► VOL+, + or VOL ► ▲
VOL-,
- or VOL ◄ ◄ VOL-, - or VOL ◄ ▼
MENU or
Menu MENU or Menu
OK OK
Remote control functions
Most of your television's functions are available via the menus that appear on the screen. The remote control
supplied with your set can be used to navigate through the menus and to congure all the general settings.
Switching on/off and standby mode
Switch on/off your TV
When powered on, the TV will be turned on directly.
To switch it off, unplug the mains socket from the
mains outlet.
Switch to standby
Press the
or POWER/ button on the set or the
button on the remote control. The TV set remains
powered up, but with low energy consumption.
Switch on from standby
Press the
or POWER/ button on the set or the
button on the remote control to switch the television
on at the last channel in the last mode, i.e. analog or
digital, or AV programme you were watching.
(*On certain models, you have to turn on the power
switch rst.)
unfreeze the picture in digital TV mode.
Option
To display the function menu to perform
certain operations; to display the Teletext
page in different mode.
Return
To return to the previous channel; to return
to the previous menu in USB function.
V+/-
To control the volume.
Info
To display programme information, if
available.
Mute
To switch the sound off and back on again.
P+/-
To change channels.
TEXT
To toggle Teletext on or off.
SUBTITLE
To select a subtitle language available for
selected digital TV programme.
LIST
To display channel list.
TV
To access TV mode.
Colour
buttons
To select tasks or Teletext pages. The
red button can also be used for MHEG
function.
Lang
To select a sound type available for
selected analog TV programme; to select
an audio language available for selected
digital TV programme.