User's Manual Part 5

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
ADAPT INSTALLATION P
♦
It prov
param
2.1.58. "VIEW ETHERNET INSTALLATION PARAMETERS" window
♦ Digital transmitter
This window is called up by pressing on the "SCREEN NEXT" message window in the "VIEW
ARAMETERS".
Analogue transmitter
This window is called up by pressing on the "SCREEN NEXT" message window in the "VIEW
EXCITER INSTALLATION PARAMETERS".
ides information on Ethernet network parameters for the transmitter, according to installation
eters. This window is only available with TH860 CPU Board.
CONTROL KEYS FUNCTIONS DISPLAY/COMMENTS
Calls up the "TRANSMITTER STATUS"
window.
Calls up the "GO HOME AND VIEW
INSTALLATION PARAMETERS" window.
MESSAGE FUNCTIONS DISPLAY/COMMENTS
Displays the Identification number of the CPU
board.
Displays the WEB activation code value. Without option in operation the control
keys displays: “0”
Displays the SNMP activation code value. Without option in operation the control
keys displays: “0”
Displays the IP address of the transmitter. When the Ethernet network is not
operated the control keys must display:
“0.0.0.0”
Displays the sub-net mask value. When the Ethernet network is not
operated the control keys must display:
“0.0.0.0”
9932 V2
45321648.01 108 B E
Checked
177 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e