User's Manual Part 4

ManualsBrandsThomson Broadcast & Multimedia ManualsElectronicsUHF Digital transmitter, for use with MediaFlo

Digital Liquid Cooled UHF

TV Equipment

Use of commands and description of indicators

Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.

INDICATOR LAMPS AND

MESS GE DISPLAYS A

FUNCTIONS DISPLAY/COMMENTS

Displays the input signal of the modulator. Data PRBS 15 / Data PRBS 17 / Dat

PRBS 20 / Data PRBS 23 / Data input ASI /

Data DVB_SPI

Displays the internal status of the modulator. Correct / Internal fault

Displays the synchronisation status of the

clock with respect to the Transport Stream.

Clock coherent / PLL unlocked / Clock not

coherent

Displays the type of clock used. CLOCK internal, CLOCK external, CLOCK

data derived

Displays the status of configuration. CFG done / CFG underway / CFG fault

Displays the SFN mode operation.status SFN ON / SFN OFF

Displays the status of the modulator. Not configured / Configured / CFG fault

Not configured

The modulator does not accept the

requested configuration.

Displays the atus. TS status normalTransport Stream st / abnormal

Displays the GPS status. GPS missing / GPS présent

GPS missing

The 10 MHz and/or 1 PPS reference

sign

als are missing.

Displays the output interface status o

modulator.

f the IQ outputs toggling /

IQ outputs stuck

(*)

Indicates which exciter data are display A / EXC B ed. EXC

(*) : Only Dual-Drive versio

9932 V2

45321648.01 108 B E

Checked

153 / 192

Numéro / Number Doc. Rev. Lan

27/06/2006