User's Manual Part 4

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
2.1.41. "10 MHz ADJUSTEMENT" window, SIRIUS version ONLY
This window is called up by pressing the "PLL 10MHz" control keys in the "SETTINGS" window.
NOTE: This window is available in SIRIUS version only.
This window is only available in Maintenance mode.
CONTROL KEYS FUNCTIONS DISPLAY/COMMENTS
Decrements the adjustment value of the
frequency 10Mhz internal by step of 1 or
by step of 10.
Displays the adjustment valu
frequency 10Mhz internal.
e of the
Increments the adjustment value of the
frequency 10Mhz internal by step of 1 or
by step of 10.
Allows to adjust the frequency 10MHz if the
choice " INTERNAL CLOCK " was selected,
we have then the message " MANUAL
ADJUSTMENT ".
The manual adjustment of the frequency is
possible whatever the state (present or
absent) in signals 1PPS or 10Mhz.
Allows saving adjustments above in the Flashes until the “SAVE”” command is either
validated or cleared. basic transmitter.
Validates a selection.
Cancels a selection.
Calls up data from the other exciter. (*)
Calls up the "SETTING" window.
INDICATOR LAMPS AND
MESSAGE DISPLAYS
FUNCTIONS DISPLAY/COMMENTS
Gives the window name.
9932 V2
45321648.01 108 B E
Checked
144 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e