User's Manual Part 4

ManualsBrandsThomson Broadcast & Multimedia ManualsElectronicsUHF Digital transmitter, for use with MediaFlo

Digital Liquid Cooled UHF

TV Equipment

Use of commands and description of indicators

Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.

2.1.38. "PREAMPLI SETTING" window, SIRIUS version ONLY

This window is called up by pressing the "PREAMP" control keys in the "SETTINGS" window.

NOTE : This window is available in SIRIUS version only

This window is only available in Maintenance mode. It displays the status of RF preamplifier

parameters of exciter A or B.

Figure 30 : Exciter on Antenna ( D.D.) Figure 31 : Exciter on Dummy load ( D.D.)

CONTROL KEYS FUNCTIONS DISPLAY/COMMENTS

Validates a selection.

Cancels a selection.

Set the reference value of the threshold in

the RF preamplifier.

Only available for the exciter on antenna

Flashes until the “SET REFER”” command is

either validated or cleared.

Appelle les données de l’autre EMB (*).

Calls up the "SETTINGS" window.

INDICATOR LAMPS AND

MESSAGE DISPLAYS

FUNCTIONS DISPLAY/COMMENTS

Give the window name.

Displays the transmitted RF power value. This value is expressed in a percentage of

calibrated power value.

Displays the current value of the output

preamplifier that is applied to the RF chain

of the transmitter.

9932 V2

45321648.01 108 B E

Checked

138 / 192

Numéro / Number Doc. Rev. Lan

27/06/2006