User's Manual Part 4

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
INDICATOR LAMPS AND
MESSAGE DISPLAYS
FUNCTIONS DISPLAY/COMMENTS
Indicates presence or absence of an MPEG3
input signal on the exciter. (1) (2)
TS 3 OK / TS 3 MISSING
This key in “DASI STATUS” window is
not available (not visible) when the
optional card (Extension Input) is not
present.
In dicates presence or absence of an MPEG4
input signal on the exciter. (1) (2)
TS 4 OK / TS 4 MISSING
This key in “DASI STATUS” window is
not available (not visible) when the
optional card (Extension Input) is not
present.
Indicates presence or absence of an
synchronization of MPEG input signal on the
exciter. (1) (3)
SYNC OK / SYNC MISSING
SYNC OK:
The MPEG is synchronized or there is a
loss of one frame.
SYNC MISSING
If a loss of frame condition persists for 2
consecutive frames, the synchronization
status is declared MISSING.
If 7 occurrences of the transport stream
framing byte is detected in the proper
place the status is declared OK
Indicates which exciter data are displayed. (*)
EXC A / EXC B
(*) : Dual-Drive version Only.
(**) : MODAP version Only.
(1) : SIRIUS version Only.
(2) : Unavailable with MediaF
(3) : MediaFLO modulator only.
LO modulator.
9932 V2
45321648.01 108 B E
Checked
131 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e