User's Manual Part 4

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
MESSAGES FUNCTIONS DISPLAY/COMMENTS
Gives the window name.
(Adaptive Linear Equaliser).
Indicates the status of the linearity correction
♦ MODAP version
LIN. COR N. FITTED/ LIN. COR ON LINE /
LIN. COR BYPASSED
♦ SIRIUS version
LIN. COR ON LINE / LIN. COR BYPASSED
s the type of linearity correction
ed by the ALE card of the EXCITER
(fixed or adaptive).
LIN. COR FIXED /
LIN. COR ADAPTATIVE
In fixed position, the correction parameters
are not continuously adjusted.
Display
perform
Indicates the status, ON LINE or
BYPASSED, of the non linearity correction
(Look Up Table).
N. LIN COR ON LINE /
N. LIN COR BYPASSED
Displays the type of non linearity correction
performed by the LUT module of the
EXCITER (fixed or adaptive).
N. LIN. COR FIXED /
N. LIN. COR ADAPTATIVE
In fixed position, the correction parameters
are not continuously adjusted.
Indicates the status of the digital filter
correction.
♦ MODAP version
DIG. FILT NOT FITTED / DIG. FILT ON LINE
/ DIG. FILT BYPASSED
♦ SIRIUS version
DIG. FILT ON LINE / DIG. FILT BYPASSED
(1)
Displays whether an OLDC unit is present or
absent in the MODAP unit.
DC ” key in “ADAPT STATUS”
indow is not available (not visible) when the
XCITER type is SIRIUS.
OLDC FITTED / OLDC N. FITTED
Note: The “ OL
w
E
Displays which type of modulator processes
the input signal.
IFIQ BOARD /
COFDM EXT 8MHz / COFDM EXT 7MHz /
COFDM BOARD 8MHz /
COFDM BOARD 7MHz /
COFDM BOARD 6MHz /
8VSB BOARD /
MediaFLO
Indicates which exciter data are displayed.(*) XC A / EXC B E
(*)
(1)
Only in Double Drive Version.
Only in ODAP vers M ion with OLDC
9932 V2
45321648.01 108 B E
Checked
128 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e