User's Manual Part 3

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
CONTROL KEYS FUNCTIONS DISPLAY/COMMENTS
Cancels a selection. (*)
window.
Calls up the "TRANSMITTER STATUS"
Calls up the "CONTROL Level 1" window.
Calls up the "EXCITER Level 2" window. (*)
Calls up the "EXCITER PANEL" window. (**)
Calls up the "AMPLIFIERS" window. (a)
Calls up the «INTERLOCK» window (a)
w. (a) Calls up the "POWER SUPPLY" windo
Calls up the "A . (b) FFINITY" window
Calls up the "DASI STATUS" window (**) This control keys is available and visible in
case of DASI board is fitted according with
your installation choice
Calls up the "OLDC STATUS" window. (**) his control keys is available and visible in
se of OLDC board is fitted according with
ur installation choice
T
ca
yo
Calls up the "MODULATOR " window, in
case of a DVB-T Transmitter. (**)
This control keys is not used in case of an
ATSC Transmitter.
Calls up the " ADAPT PARAMETERS "
window. (**)
Indicates the exciter status (proper operation EXCITER A OK /
B OK
ULT /
XCITER. B FAULT (1)
or fault). EXCITER
EXCITER. A FA
E
Indicates whether the exciter delivered the
RF power to a load, or on-air.
software configuration and that of the
MODAP.
RF ON: RF signal on the exciter output.
F OFF: RF signal absence on the exciter
utput.
OT COMPLIANT
Flashes
/
O
Indicates the consistency between the CPU
R
o
N
r
if the CPU software configuration is
not consistent with that of the MODAP. Red
quare is blinking of light. s
Otherwise
not visible.
9932 V2
45321648.01 108 B E
Checked
108 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e