User's Manual Part 3

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
2.1.23. "FLO 2 PARAMETERS" window
TERS" window. It is only accessible in maintenance mode.
This window is called up by pressing the "NEXT SCREEN." control keys in the "FLO 1 MODULATOR
PARAME
It is used to change the MediaFLO modulator card configuration parameters stored in the CPU card.
CONTROL KEYS FUNCTIONS SELECTIONS
AVAILABLE/COMMENTS
Selects values of the modulation
parameters.
♦ Infra ID: This value is in
the infrastructure ID
serted into
field of the Local
cal time offset field of the local
key calls up the
r can be changed.
is inserted into the
daylight field of the local system
parameters message.
system parameters message. The
network sets this field to the identifier
assigned to the local area
infrastructure.
♦ LT Offset: This value is inserted into
the lo
system parameters message.
Pressing this
"NUMERICAL VALUE" window in which
this PID numbe
♦ Daylight: ON / OFF
This indicator
ON: Local transmitter time is daylight
saving time.
9932 V2
45321648.01 108 B E
Checked
100 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e