User's Manual Part 2

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
MESSAGE FUNCTIONS DISPLAY/COMMENTS
the transmitter.
SERIAL
Displays the current remote control mode of SERIAL / PARALL
: Remote control through a
RS432/485 serial link.
PARALL
(Remote controls and indicat
Remote control through hard
ors):
wired
connections.
Displays the selected user interface. RE
REMOTE
MOTE / LOCAL
: Indicates a remote user interface.
LOCAL
: Indicates Local Control Panel.
Only commands from the selected user
interface will be operative.
Flashes until the "CTRL" command is either
validated or cleared.
Only in Double Drive Version
Displays the status (on or off) of the reserve
exciter.
OFF / ON
Flashes until the "STDBY" command is
either validated or cleared.
Only in Analogue Transmitter
Displays the on-air/off-air switching mode
selected
MANUAL, AUTO
Flashes until the «START» command is
either validated or cleared
Displays the current operating mode of the
transmitter (maintenance mode or normal
mode).
NORMAL / MAINT
Flashes s either
validated
/
until the "MODE" command i
or cleared.
9932 V2
45321648.01 108 B E
Checked
71 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e