User's Manual Part 2

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
MESSAGE FUNCTIONS DISPLAY/COMMENTS
To indicate the exciter changeover mode
atic mode (Lower indicator).(*)
Upper indicator
(Upper indicator).
To indicate the exciter changeover status in
autom
CH-OVER MAN
(Manual) : only when
operator gives a command.
CH-OVER AUTO
: automatic changeover
ulty.
Lower indicator
CH ER NOT DONE /
CH OVER IMPOSSIBLE
when the selected exciter is fa
OVER DONE / CH OV
: the changeover system is
ready for an automatic switch over.
: the changeover system is
no longer available and it is necessary to
change the exciter selected or to carry out a
transmitter "RESET" (in this latter case, care
must be taken because fault data for all
faults which have disappeared will be erased
together with their consequences; similarly
for all selections carried out on the PCL).
: an attempt to carry out an
automatic changeover has failed.
(*) : Only in Dual Drive Version
9932 V2
45321648.01 108 B E
Checked
60 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e