User's Manual Part 1

ManualsBrandsThomson Broadcast & Multimedia ManualsElectronicsUHF Digital transmitter, for use with MediaFlo

Digital Liquid Cooled UHF

TV Equipment

Exploitation

Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.

1.9. Procedure for switching on and off

1.9.1. Switching on-air and switching off-air

Switching on (TX on) means switching the transmitter to air when mains has already been switched to

Switching off (TX off) means taking the transmitter off-air while keeping the mains switched on.

On-air and off-air sw L.

the transmitter.

itching are carried out by using the "ON" and "OFF" keys of the PC

ACTION RESULT

Switching the

transmitter on

♦ Press on the PCL "ON" key. ♦ The PCL "On" indicator lamp lights up to indicate

that the transmitter is on-air.

♦ The amplifier power supplies and cooling system

are switched on.

♦ The system is on-air.

Switching the

transmitter off

♦ Press on the PCL "OFF" key. ♦ The PCL "Off" indicator lamp lights up to indicate

that the transmitter is off-air.

♦ The amplifier power supplies and cooling system

are switched off.

♦ The system is off-air.

On/off override

The SW2 and SW3 switches on the exciter/CPU interconnection card and RSCOM software can be

used to switch the transmitter off (SW3) or on (SW2) if the CPU card is missing or faulty.

1.9.2. Switching the reserve exciter on and off

Only in Double Drive Version

Switching the reserve exciter on and off is only possible if the PCL is unlocked, i.e. enabled (see

relevant procedure).

It is carried out using the "CONTROL Level 1" window independently of the transmitter operating

mode (normal mode or maintenance mode).

Note : While the reserve exciter is on, automatic changeover of the exciters is impossible.

ACTION RESULT

Selection

♦ Press the "STDBY" control keys in the

"CONTROL Level 1" window.

♦

The message window above the control

keys flashes while displaying the function

(on or off) to be carried out.

Validation of selection

♦ Press the "VALID" key.

♦

The message window above the "STDBY"

control keys stops flashing and remains lit

while displaying the status (on or off) of the

reserve exciter.

Cancelling the

selection

♦ Press the "CANCEL" key.

♦

The message window above the "STDBY"

control keys stops flashing and remains lit

while displaying the status (on or off) of the

reserve exciter.

9932 V2

45321648.01 108 B E

Checked

34 / 192

Numéro / Number Doc. Rev. Lan

27/06/2006