User's Manual Part 1

ManualsBrandsThomson Broadcast & Multimedia ManualsElectronicsUHF Digital transmitter, for use with MediaFlo

Digital Liquid Cooled UHF

TV Equipment

Exploitation

Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.

1.8.2. Selection of transmitter operation mode

ating mode (maintenance mode or normal modeSelecting the transmitter oper ) is carried out in the

possible if the PCL is unlocked (see § Procedure to Unlock the PCL).

PCL "CONTROL Level 1" window.

This operation is only

Note: In normal mode all transmitter functions are operational. No settings or parameters can be

adjusted by the operator.

ocessing facilities are not operational,

In maintenance mode :

♦ The fault pr

♦ The operator can adjust some settings and parameters.

ACTIONS RESULT

Selection

(NORMAL/M

rating mode which can be either the

l mode.

of operating

ode

AINT)

♦ Press the «MODE» control keys in the

"CONTROL Level 1" window.

♦

The message window above the control

keys flashes indicating the newly selected

ope

maintenance mode or norma

Validation of sele

♦

The message window above the "MODE"

control keys stops flashing and remains lit

while displaying the newly selected

operating mode.

ction

♦ Press the "VALID" key.

Cancelling the

selection

♦ Press the "CANCEL" key.

♦ The message window above the "MODE"

control keys stops flashing and remains lit

while displaying the operating mode which

had been previously selected.

1.8.3.

Only i Drive Version

The procedure for manual changeover of exciter is only po e PCL is unlocked, and if the

system is in local control mode. It consists of changing the exciter already selected.

l 1" window.

Manuel change over of exciter

n Double

ssible if th

It can be carried out in the "EXCITER Leve

ACTION RESULT

Changing the

selected exciter

♦ Press on "EXCITER" control keys in the

"EXCITER Level 1" window.

♦ The «EXC A (or B)» message window flashes

while displaying the reserve exciter.

Validation of selection

♦ Press the "VALID" key. ♦ The «EXC A (or B)» message window stops

flashing and remains lit while displaying the newly

selected exciter.

Cancelling the

♦ Press the "CANCEL" key. ♦ The «EXC A (or B)» message window stops

selection

flashing and remains lit while displaying the

previously selected exciter.

Exciter changeover override

Switches SW4 and SW5 on the exciter/CPU interconnection

(SW 5) t available or m

card provide for switching exciter A

4) or B (SW o air if the CPU card is un issing.

9932 V2

45321648.01 108 B E

Checked

32 / 192

Numéro / Number Doc. Rev. Lan

27/06/2006