User's Manual Part 1

Digital Liquid Cooled UHF
TV Equipment
Exploitation
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
Leaving the installation mode: When the PCL displays the "INSTALLATION PARAMETERS Level 1"
window, proceed as follows :
ACTIONS RESULT
Leaving the
installation mode
♦ Press the valid key in the
"INSTALLATION PARAMETERS Level 1"
windo
♦ The transmitter stores the new configuration
parameters.
w
xciter/CPU interconnection card, such
visible.
♦ Reset the CPU board
♦ The system is initialised with the new status and
♦ The "STATUS" window appears and indicates
that the system is in normal operating mode.
♦ Set switch SW1, situated in the
e
that the dot is not
operational parameters.
9932 V2
45321648.01 108 B E
Checked
22 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e