User's Manual Part 1

Digital Liquid Cooled UHF
TV Equipment
Exploitation
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
Leaving the installation mode: When the PCL displays the "INSTALLATION PARAMETERS Level 1"
window, proceed as follows :
ACTIONS RESULT
Leaving the
installation mode
♦ Press the valid key in the
"INSTALLATION P
♦ The transmitter stores the new configuration
ARAMETERS Level 1"
window
♦ Set switch SW1, situated in the
exciter/CPU interconnection card, such
that the dot is not visible.
parameters.
♦ The system is initialised with the new status and
operational parameters.
♦ The "STATUS" w pears and indicates
♦ Reset the CPU board
indow ap
that the system is in normal operating mode.
9932 V2
45321648.01 108 B E
Checked
20 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e