User's Manual Part 1

ManualsBrandsThomson Broadcast & Multimedia ManualsElectronicsUHF Digital transmitter, for use with MediaFlo

Digital Liquid Cooled UHF

TV Equipment

Exploitation

Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.

The configuration parameters of the COFDM and SFN can be defined in the "COFDM

PARAMETERS" window of the PCL in maintenance mode.

These parameters are used in DVB-T Transmitters only.

ACTIONS RESULT

To call up the

"COFDM

♦ Press "MO

MAINT Level 2"

PARAMETERS"

window of the PCL

DUL" in the "CONTROL

window.

♦

The "COFDM PARAMETERS" window

appears on the PCL and displays the

current COFDM configuration parameters.

Changing a COFDM

♦ Press on the co

parameter

ntrol keys corresponding

to the parameter to be changed and then

press repeatedly until the required

configuration appears.

♦ Press the valid key for validation the new

♦

The names of the available configurations

for the parameter in question will appear

one after the other on the control keys.

entry

Changing a SFN

parameter

♦

ue on the window

keyboard

♦

♦ The value is displayed under the window title.

Press on the control key corresponding to

the parameter to be changed

♦ Enter the required val

Press "ENTER" to validate the entry.

♦

keys.

♦ The "NUMERICAL VALUE" window appears.

The "COFDM PARAMETERS" window appears.

The value is displayed on the parameter control

and "F ARAMET CL

in maintenance mode.

he configuration p

LO2 P

arameters of the MediaFLO can be de

ERS" window of the P

fined in the "FLO1 PARAMETERS" window

These parameters are used in MediaFLO Transmitters only.

ACTIONS RESULT

To call up the "FLO1

PARAMETERS"

window of the PCL

UL" in the "CONTROL ♦ ARAMETERS" window appears on

the PCL and displays the current MediaFLO

configuration parameters (GENERAL / DATA

SRC / Clock / TIMING / INPUT).

♦ Press "MOD

MAINT Level 2" window.

The "FLO1 P

To call up the "FLO2

PARAMETERS"

window of the PCL

♦ ♦ The "FLO2 PARAMETERS" window appears on

the PCL and displays the current MediaFLO

configuration parameters. (MODULATION /

CHANNELIZER)

Press "NEXT SCREEN" in the "FLO1

PARAMETERS" window.

Changing a FLO

parameter

tedly until the required

configuration appears.

other on the control keys.

♦ Press on the control keys corresponding

to the parameter to be changed and then

press repea

♦ Press the valid key for validation the new

entry

♦

The names of the available configurations

for the parameter in question will appear

one after the

9932 V2

45321648.01 108 B E

Checked

18 / 192

Numéro / Number Doc. Rev. Lan

27/06/2006