User's Manual Part 1

Digital Liquid Cooled UHF
TV Equipment
Exploitation
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
PARAMETERS PCL WINDOWS
RF transistor currents in the power amplifiers
"AMPLIFIERS" window
Central frequency rejection level (1)
"OLDC PARAMETERS" window
I/Q amplitude error level (1)
"OLDC PARAMETERS" window
(1) MODAP version only
(2) SIRIUS version only
(3) MediaF ly
1.2.5. Status conditions of main transmitter elements
LO SIRIUS version on
PARAMETERS PCL WINDOWS
Status of exciter cards "EXCITER PANEL" window
or
"EXCITER Level 2" window *
Status of reserve exciter (on or off) * "CONTROL" window
Status of exciter signals "EXCITER PANEL" window
"EXCITER Level 1" window *
or
Power amplifier status parameters "AMPLIFIERS" window
Sta "POWER SUPPLY" window tus of amplifier power supplies
Status of protection system surveillance devices "INTERLOCK" window
Status of the COFDM modulator** "MODULATOR STATUS" window
or
"MODULATOR CONFIGURATION" window
Status of the 8VSB modulator*** "MODULATOR CONFIGURATION" window
Status of the MediaFLO configuration for the modulator "MODULATOR FLO 1" window and "MODULATOR FLO 2"
window
Status of the ADAPT exciter "ADAPT PARAMETERS" window
Status of the DASI card “DASI STATUS” window
Status of the OLDC card (1) "OLDC STATUS" window
Status of the current gain control mode (2) "AGC SETTING" window
* : Only in Double Drive Version.
** : Parameters used in DVB-T Transmitters only.
(2) SIRIUS version only
(3) MediaFLO SIRIUS version only
*** : Parameters used in ATSC Transmitters only.
(1) MODAP version only
9932 V2
45321648.01 108 B E
Checked
14 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e