User's Manual Part 1

Digital Liquid Cooled UHF
TV Equipment
Exploitation
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
1.2. Where to find operational parameters
titles of the various PCL windows in wh h the various operational
para rator can be found. The commands for accessing these windows are
ven in other paragraph.
onfiguration parameters
The following tables give the
meters available to the ope
ic
gi
1.2.1. Transmitter c
PARAMETERS PCL WINDOWS
RF synthesiser frequency
"INSTALLAT l 1" window
"GO HOME AND VIEW INSTALLATION
PARAMETERS" window
"CONTROL MAINT Level 3" window
ION PARAMETERS Leve
Frequency range (VHF/UHF)
Maximum power
Calibrated power
Cooling e of the transmitter typ
Transmitter type (S uble Drive, Passive
Reserve, Active Reser
imple Drive, Do
ve, N+1)
Modulation type of the transmitter (Analog /Digital)
Language selected
Type of display used (dB or %)
"INSTALLATION PARAMETERS Level 1" window
"GO HOME AND VIEW INSTALLATION
PARAMETERS" window
Type of remote operation (via serial link or hard wired)
Type of protocol operation for remote control (JBUS or
ASCII)
Transmitter Identification number with RS232 / RS 485
"TRANSMITT TALLATION
P w
"VIEW TRAN TALLATION
PARAMETERS " window
ER INTERFACE INS
ARAMETERS" windo
SMITTER INTERFACE INS
Type of bay used,
Current measurement number by amplifier unit
Amplifier number detected by cabinet
"CABINET CONFIGURATION PARAMETERS" window
"VIEW CABINET CONFIGU ION RATION INSTALLAT
PARAMETERS" window
Amplifier location in each cabinet
"LOCAT ndow ION AMPLIFIER " wi
OLDC parameters (1)
DASI parameters (1)
ADAPT parameters
Type of modulator (COFDM / 8VSB)
"ADAPT INSTALLATION PARAMETERS" window
"VIEW ADA RS " window PT INSTALLATION PARAMETE
Web activation code
SNMP activation code
"ETHERNET INSTALLATION PARAMETERS" window
"VIEW ETHERNET METERS " INSTALLATION PARA
window
Network administrator configuration (IP address, sub-
net mask number)
Quality thresholds used for
parameters power, shoulder and
the notation of the
ripple
"QUALITY THRESHOLD SETTINGS" window
ATSC parameters***
COFDM parameters**
SFN data**
"COFDM or 8VSB PARAMETERS" window
Mediaflo modulator parameters ****
(General / Timing / Data SRC / Clock / Input)
(Modulation / channalizer)
"FLO 1 PARAMETERS" window and
"FLO 2 PARAMETERS" window
9932 V2
45321648.01 108 B E
Checked
11 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e