User's Manual Part 3
ACCESSORIES AND OPTIONS
**
(continued)
INTERNAL CORROSION PROTECTION: For corrosive or other hostile environments, special coating material is applied to copper lines, coils
and other parts subject to damage.
Append letter "H" to Part No.
POWER LOSS DELAYED COMPRESSOR START: Protects the compressor from possible damage due to harmful short cycling, by initiating an
“off” period before resumption of normal operation. Generally air conditioners require several minutes off for compressor protection after power inter-
ruptions of any type. These power interruptions can include power failures, opening of interlocked access doors, and cases where a thermostat activates
the compressor in less than a few minutes. This option is particularly recommended for applications where frequent, brief power failures occur, inter-
locked cabinet doors are utilized, or where the cabinet internal loads fluctuate across a wide range.
Append letter "Y" to Part No.
SHORT CYCLE PROTECTOR: Protects the compressor from possible damage due to harmful short cycling, by initiating an "off" period before
resumption of normal operation. Generally air conditioners require several minutes off for compressor protection after power interruptions of any type.
These power interruptions can include power failures, opening of interlocked access doors, and cases where a thermostat activates the compressor in
less than a few minutes. This option is particularly recommended for applications where frequent, brief power failures occur, interlocked cabinet doors
are utilized, or where the cabinet internal loads fluctuate across a wide range.
Append letter "Y" to Part No.
SPECIAL PAINT FINISHES**
PAINTED METAL GRILLE**
Append letter “Z” to Part No.
CUSTOMER-INSTALLED OPTIONS:
FILTERS FOR REPLACEMENT: All KOOLTRONIC filters consist of a multi-layer grid of sturdy corrugated aluminum, securely held in a one-piece
aluminum frame. Filters are required wherever air is drawn into an electronics enclosure or related cooling equipment to keep internal parts as clean as possible.
A non-drying adhesive coating traps a high percentage of particulate matter. These washable, reusable filters are designed to last the life of the cooling
unit. Replacements are available for those which become damaged or otherwise non-serviceable.
Part No. 11631F (11.63 x 21.63 x 0.38 [295mm x 321mm x 10mm])
FILTER RECOATING ADHESIVE: This compound is a superior product for recoating all permanent filters after washing. The adhesives penetrate
dirt layers to keep the filter surface tacky for longer effective performance between washings.
Part No. A-16 - one pint container.
**Contact KOOLTRONIC for information.
Kooltronic, Inc., 30 Pennington-Hopewell Road, P.O. Box 240, Pennington, NJ 08534-0240
Tel: (609) 466-3400 Fax: (609) 466-1114 Internet: www.kooltronic.com E-Mail: sales@kooltronic.com