User's Manual Part 2

Driver Section - 98 -
®
Affinity LBD-200C-N1 Transmitter
Product Manual
11.2.4 Upconverter Module Front and Rear Panel Description
Front Panel
Thumbscrews: This hardware secures the module to the sub-chassis and provides a reliable
ground connection. Loosen to remove the module for replacement or repair.
Liquid Crystal Display (LCD): The LCD displays a series of measurements, user adjustments,
and general status information.
RF Sample: The RF Sample port is a female SMA 50: connector used to test the output level.
NOTE: The RF Sample contains pre-distortion and is not representative of output signal. The
RF sample is a reference point for testing only.
RS-232 Communication Port: The Communication port is an EIA standard RS-232 port used
for communicating with a PC.
Keypad: The Upconverter Keypad assembly contains user selection keys.
SEL: Select provides the user with scrolling capabilities.
ENT: Enter allows the user to choose an option.
ESC: Escape allows the user to go back to the previous screen
SAVE: Save allows the user to store new settings or adjustments
Handle: The Handle is used to assists with the removal of the module from the Sub-Chassis.
Thumbscrew
Liquid Crystal Display
RF Sample
Keypad
Handle
Upconverter Plug-in Module Front View