User's Manual Part 2

Driver Section - 83 -
®
Affinity LBD-200C-N1 Transmitter
Product Manual
Power input interlock All voltage outputs are disabled
when a negative supply is
overloaded to prevent damage to
equipment.
Internal Fuse (F1) Thales P/N 750082-01
Power Supply Plug-In Module Specifications (cont.)
Environmental
Cooling Forced air-cooled, minimum of 8 CFM required Forced air-cooled
drawing ambient air
through the intake on
the front of the power
supply and exhausting
out the rear.
Operating temperature 0° to 50° C
Relative humidity 0 to 95% non-condensing
Alarms/Indicators/Adjustments/Controls
DC output failure alarm TTL Low=DC output failure Signal available at
backplane
DC OK indicator A lit Green LED=DC is within tolerance Visible via front panel
Agency Compliance
Safety Meets UL and CSA approvals Pending
Physical
Weight 4.5 lbs (2.04 Kg)
Front panel color Matches Sherwin William’s Paint#:
Light gray-F63TXA2555
Paint mix number 4303
identifies store locations
when added to paint
number
Lexan overlay color
matched as indicated.
Mechanical dimensions 4.75”H x 3.0”W x 17.5” D
(12.07cm H x 7.62cm W x 44.45cm D)
Power Supply Firmware P/N
(Programmed onto 47266096 DC converter board)
File name
47266093.01-525 PWRSUP1_1.s19