User's Manual Part 2

Driver Section - 82 -
®
Affinity LBD-200C-N1 Transmitter
Product Manual
11.1.1 Power Supply Plug-In Module Specifications
Parameter Specification Notes
Input
Input voltage 48VDC
Input current 4 amps, maximum Low line @ full rated power
Peak inrush current  6 amps
Efficiency 85% typical Full load
Output
Main Output
12V
DC ± .5
+8V
DC ± .5
+24V
DC ±.5
-12V
DC ±.5
All voltages are fixed
Output current Main Output
+12V @ 3.5 amps
+8V @ 3.0 amps
-12V @ 0.185 amps
+24V @ 0.240 amps
Output supply interruption will
occur during overload conditions
Output power Main Output
+12V @ 42 watts
+8V @ 24 watts
-12V @ 2.2 watts
+24V @ 5.8 watts
Output supply interruption will
occur during overload conditions
Ripple & noise  200 mv pp 20 MHz BW
Load regulation .4% no load to full load
Protection
Over voltage Power supply will shut down if
voltage exceeds nominal voltage
by 20%
Over current Power supply will shut down if
current exceeds maximum value
Over Temperature Power supply will shut down if
temperature exceeds 70°C.
Restart is automatic when power
supply returns to normal
operating temperature. If over
temperature condition occurs
twice, power supply will latch in a
shutdown condition.
Output voltage