User's Manual Part 2

Exciter Configuration Description - 67 -
Affinity
®
LBD-200C-N1 Transmitter
Product Manual
RF output specifications
UHF Band430-900MHz
Parameters Specifications Comments / Notes
Frequency Tuning
Range
430-900MHz Covers UHF Band
Tuning Step Size
Coarse
Fine
N/A
1Hz
Non-Harmonic Spurious 100Hz < ƒ
offset
< 10MHz, 65dBc
beyond 10MHz < 65dBc
SSB Phase Noise
(typical)
See UHF mask for
guaranteed limits
d65 dBc/Hz @ 10Hz offset
d85 dBc/Hz @ 100Hz offset
d90 dBc/Hz @ 1kHz offset
d104 dBc/Hz @ 10kHz offset
d115 dBc/Hz @ 100kHz offset
d130 dBc/Hz @ 1MHz offset
Depends on frequency reference
source. The reference must be
d140 dBc/Hz @ 100Hz offset;
Measured with Thales standard
OCXO based MRO. Phase noise
specifications below loop
bandwidth based on system noise
floor = –213+10log ƒ
comp
+ 20log
N.
VHF Band 54-300MHz
Parameters Specifications Comments / Notes
Frequency Tuning
Range
54-300MHz Covers VHF Bands I,II,&III
Tuning Step Size
Coarse
Fine
N/A
1Hz
Non-Harmonic Spurious 100Hz < ƒ
offset
< 10KHz, 65dBc
10KHz < ƒ
offset
< 10MHz, 60dBc
beyond 10MHz < 60dBc
SSB Phase Noise
(typical)
d65 dBc/Hz @ 10Hz offset
d85 dBc/Hz @ 100Hz offset
d101 dBc/Hz @ 1kHz offset
d107 dBc/Hz @ 10kHz offset
d120 dBc/Hz @ 100kHz offset
d135 dBc/Hz @ 1MHz offset
Depends on frequency reference
source. The reference must be
d140 dBc/Hz @ 100Hz offset.
Measured with Thales standard
OCXO based MRO.