Data Sheet

ManualsBrandsThomsen ManualsCapacitors1 pc(s) MKP thin film capacitor Radial lead 1 µF 310 V AC 20 % 27.5 mm (L x W x H) 31 x 13 x 23 mm

MKP339 X2

www.vishay.com

Vishay BCcomponents

Revision: 24-Jul-2019

Document Number: 28138

For technical questions, contact: rfi@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Interference Suppression Film Capacitors

MKP Radial Potted Type

FEATURES

• AEC-Q200 qualified (rev. C)

• 7.5 mm to 27.5 mm lead pitch

• Supplied loose in box, taped on ammopack

or reel

• Material categorization: for definitions of

compliance please see www.vishay.com/doc?99912

APPLICATIONS

For standard across the line X2 applications.

See also application note: www.vishay.com/doc?28153

Note

•For more detailed data and test requirements, contact rfi@vishay.com

QUICK REFERENCE DATA

Capacitance range (E12 series) 0.001 µF to 4.7 µF (preferred values acc. to E6)

Capacitance tolerance ± 20 %; ± 10 %; ± 5 %

Rated AC voltage 310 V

; 50 Hz to 60 Hz

Permissible DC voltage

800 V

at 85 °C

630 V

at 110 °C

Climatic testing class (according to IEC 60068-1)

55/110/56/C for product volumes  1750 mm

55/110/56/B for product volumes > 1750 mm

Maximum application temperature

C  470 nF: 110 °C (125 °C for less than 1000 h)

C > 470 nF: 110 °C

Leads Tinned wire

Reference standards

IEC 60384-14 ed-4 (2013) and EN 60384-14

IEC 60065 requires pass. flamm. class B for volumes > 1750 mm

UL 60384-14

CSA-E384-14

CQC

Dielectric Polypropylene film

Electrodes Metallized film

Construction

Mono construction

Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0

Marking

C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation;

code for dielectric material, manufacturer location; manufacturer’s logo or name;

year and week; safety approvals

DIMENSIONS in millimeters

Ø d

Summary of content (18 pages)

PAGE 1
MKP339 X2 www.vishay.com Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES • AEC-Q200 qualified (rev. C) • 7.5 mm to 27.5 mm lead pitch • Supplied loose in box, taped on ammopack or reel • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS For standard across the line X2 applications. See also application note: www.vishay.
PAGE 2
MKP339 X2 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES MULTIPLIER (nF) 7.5 mm CAPACITANCE (numerically) 0.1 2 1 3 22.5 mm 10 4 27.5 mm 100 5 10.0 mm 339 15.0 mm X2 Example: 104 = 10 x 10 = 100 nF BFC2 TYPE PACKAGING Loose in box Taped (1) Loose in box Taped (1) Loose in box 339 X2 Taped (1) PACKAGING Loose in box Taped (1)(2) Loose in box Taped (1)(2) Loose in box Taped (1)(2) 339 XX XX X STANDARD DIMENSIONS Lead length 3.5 mm + 1 mm/- 0.
PAGE 3
MKP339 X2 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC voltage (URAC) 310 V Permissible DC voltage (URDC) 630 V Tangent of loss angle: at 1 kHz at 10 kHz C < 470 nF  10 x 10-4  20 x 10-4 470 nF  C 1 μF 20 x 10-4 70 x 10-4 C > 1 μF 30 x 10-4 - Rated voltage pulse slope (dU/dt)R at 435 VDC: Pitch = 7.5 mm 600 V/μs Pitch = 10 mm 600 V/μs Pitch = 15 mm 400 V/μs Pitch = 22.5 mm 150 V/μs Pitch = 27.
PAGE 4
MKP339 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 7.5 mm CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING URAC (V) 310 CAP. (μF) DIMENSIONS wxhxl (mm) AMMOPACK (1) LOOSE IN BOX MASS (g) (2) SHORT LEADS It = 3.5 mm It = 5.0 mm + 1 mm/- 0.5 mm ± 1.0 mm PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 10 % 0.0010 10102 12102 0.0012 10122 12122 0.0015 10152 12152 0.0018 10182 12182 0.0022 10222 12222 0.0027 10272 12272 0.0033 10332 12332 0.
PAGE 5
MKP339 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 10 mm CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) SHORT LEADS LONG LEADS AMMOPACK (1) LARGE REEL (500 mm) (1)(2) H = 18.5 mm P0 = 12.7 mm H = 18.5.mm P0 = 15.0 mm It = 3.5 mm It = 5.0 mm I = 25.0 mm SPQ t SPQ + 1 mm/- 0.5 mm ± 1.0 mm ± 2.0 mm SPQ SPQ PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 0.
PAGE 6
MKP339 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 10 mm CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) SHORT LEADS AMMOPACK (1) LARGE REEL (500 mm) (1)(2) H = 18.5 mm P0 = 12.7 mm H = 18.5.mm P0 = 15.0 mm LONG LEADS It = 3.5 mm It = 5.0 mm I = 25.0 mm SPQ t SPQ + 1 mm/- 0.5 mm ± 1.0 mm ± 2.0 mm SPQ SPQ PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 % 0.
PAGE 7
MKP339 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 15 mm CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING URAC (V) DIMENSIONS wxhxl (mm) CAP. (μF) LARGE REEL (500 mm) (1)(2) LOOSE IN BOX MASS (g) (3) SHORT LEADS It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm LONG LEADS SPQ It = 25.0 mm ± 2.0 mm H = 18.5 mm P0 = 12.7 mm SPQ SPQ PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % 0.010 90001 90007 90014 90021 0.
PAGE 8
MKP339 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 15 mm CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING URAC (V) DIMENSIONS wxhxl (mm) CAP. (μF) LARGE REEL (500 mm) (1)(2) LOOSE IN BOX MASS (g) (3) SHORT LEADS It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm LONG LEADS SPQ It = 25.0 mm ± 2.0 mm H = 18.5 mm P0 = 12.7 mm SPQ SPQ PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 % 0.010 90221 90232 90243 90254 0.
PAGE 9
MKP339 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 22.5 mm CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING URAC (V) DIMENSIONS wxhxl (mm) CAP. (μF) LARGE REEL (500 mm) (1)(2) LOOSE IN BOX MASS (g) (3) SHORT LEADS It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm H = 18.5 mm P0 = 12.7 mm LONG LEADS SPQ It = 25.0 mm ± 2.0 mm SPQ SPQ PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % 0.12 11124 13124 15124 17124 0.
PAGE 10
MKP339 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 27.5 mm CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (1) SHORT LEADS It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm LONG LEADS SPQ It = 25.0 mm ± 2.0 mm SPQ PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 0.47 90076 9.0 x 19.0 x 31.5 90078 5.5 0.68 90081 100 21684 23684 150 25684 1.0 11.0 x 21.0 x 31.0 7.
PAGE 11
MKP339 X2 www.vishay.com Vishay BCcomponents APPROVALS SAFETY APPROVALS X2 EN 60384-14 (ENEC) (= IEC 60384-14 ed-4 (2013)) UL 60384-14 CSA-E384-14 CQC VOLTAGE VALUE FILE NUMBERS LINK 310 VAC 1 nF to 4.7 μF ENEC16/FI/19/10001 www.vishay.com/doc?28179 310 VAC 310 VAC 1 nF to 4.7 μF 1 nF to 4.7 μF 310 VAC 1 nF to 4.7 μF E354331 E354331 CQC 07001021281 (L) www.vishay.com/doc?28180 CQC 06001018290 (F) www.vishay.com/doc?28181 www.vishay.com/doc?28184 CB test certificate 310 VAC 1 nF to 4.
PAGE 12
MKP339 X2 www.vishay.com Vishay BCcomponents CHARACTERISTICS Axis Title Axis Title 10000 4 10000 1000 1 nF 2 4.7 nF 10 nF 47 nF 100 nF 100 Typical -2 1 470 nF 1000 nF 4700 nF 100 -4 1000 10 1st line 2nd line Maximum 2nd line Z (Ω) 1st line 2nd line 2nd line ΔC/C (%) 1000 0 0.1 100 Minimum 10 -6 -50 0 50 0.
PAGE 13
MKP339 X2 www.vishay.com Vishay BCcomponents Axis Title 1 000 000 10000 RC (s) 2nd line 1st line 2nd line 1000 100 000 100 10 10 000 0 20 40 60 80 100 Tamb (°C) Insulation resistance as a function of ambient temperature (typical curve) APPLICATION NOTES • For X2 electromagnetic interference suppression in standard across the line applications (50 Hz / 60 Hz) with a maximum mains voltage of 310 VAC • For series impedance applications we refer to application note www.vishay.
PAGE 14
MKP339 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.
PAGE 15
MKP339 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.9.2 Final measurements Visual examination No visible damage Capacitance |C/C|  5 % of the value measured initially. Tangent of loss angle Increase of tan :  0.008 for: C  1 μF or  0.
PAGE 16
MKP339 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB GROUP C2 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C|  5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan :  0.008 for: C  1 μF or  0.005 for: C > 1 μF Compared to values measured in 4.12.1.
PAGE 17
MKP339 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles  charged to 435 VDC Discharge resistance: 435 V DC R = -------------------------------------------------  1.25 x C  dU  dt   4.15.1 Initial measurements Capacitance Tangent of loss angle: For C  1 μF at 10 kHz For C > 1 μF at 1 kHz 4.15.
PAGE 18
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.