SAFETY DATA SHEET 49851/49858 Section 1. Identification Product name Product code Other means of identification : THOMPSON'S® WATER SEAL® Penetrating Timber Oil Mahogany : 49851/49858 : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable. Manufacturer : THE THOMPSON'S COMPANY 101 Prospect Ave. N.W.
Section 2. Hazards identification General Prevention Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing.
Section 4. First aid measures Description of necessary first aid measures Eye contact Inhalation Skin contact Ingestion : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Section 4. First aid measures Notes to physician Specific treatments Protection of first-aiders : In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours. : No specific treatment. : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Section 6. Accidental release measures Small spill Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. : Stop leak if without risk. Move containers from spill area.
Section 8. Exposure controls/personal protection Methyl Ethyl Ketoxime Appropriate engineering controls Environmental exposure controls AIHA WEEL (United States, 10/2011). Skin sensitizer. TWA: 10 ppm 8 hours. : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Section 9. Physical and chemical properties Boiling point : 138°C (280.4°F) Flash point : Closed cup: 44°C (111.2°F) [Pensky-Martens Closed Cup] Evaporation rate : 0.13 (butyl acetate = 1) Flammability (solid, gas) : Not available. Lower and upper explosive (flammable) limits Vapor pressure : Lower: 0.9% Upper: 10.5% Vapor density Relative density : 5 [Air = 1] : 0.93 Solubility : Not available. Partition coefficient: noctanol/water Auto-ignition temperature : Not available.
Section 11. Toxicological information Product/ingredient name Result Species Score Exposure Observation Linseed Oil Skin - Moderate irritant Human - - Methyl Ethyl Ketoxime Eyes - Severe irritant Rabbit - 72 hours 300 milligrams Intermittent 100 microliters - Sensitization Not available. Mutagenicity Not available. Carcinogenicity Not available. Classification Product/ingredient name OSHA IARC NTP Cobalt 2-Ethylhexanoate - 2B - Reproductive toxicity Not available.
Symptoms related to the physical, chemical and toxicological characteristics Eye contact : Adverse symptoms may include the following: pain or irritation watering redness Inhalation : Adverse symptoms may include the following: reduced fetal weight increase in fetal deaths skeletal malformations Skin contact : Adverse symptoms may include the following: irritation redness reduced fetal weight increase in fetal deaths skeletal malformations Ingestion : Adverse symptoms may include the following: reduced feta
Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure 3-Iodo-2-propynyl Butyl Carbamate Acute LC50 500 ppb Fresh water Crustaceans - Hyalella azteca 48 hours Acute LC50 40 ppb Fresh water Acute LC50 67 µg/l Fresh water Daphnia - Daphnia magna Fish - Oncorhynchus mykiss Juvenile (Fledgling, Hatchling, Weanling) Fish - Pimephales promelas Fish - Pimephales promelas 48 hours 96 hours Chronic NOEC 8.
Section 14. Transport information Transport hazard class(es) 3 3 3 3 3 Packing group III III III III III Environmental hazards No. No. No. No. No. Additional information This product may be re-classified as "Combustible Liquid," unless transported by vessel or aircraft. Non-bulk packages (less than or equal to 119 gal) of combustible liquids are not regulated as hazardous materials.
California Prop. 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Section 16. Other information Hazardous Material Information System (U.S.A.) * 2 Health Flammability 2 Physical hazards 0 The customer is responsible for determining the PPE code for this material.
Section 16. Other information determine the conditions necessary for the safe use of this product. The customer/buyer/user should not use the product for any purpose other than the purpose shown in the applicable section of this SDS without first referring to the supplier and obtaining written handling instructions. Due to the proliferation of sources for information such as manufacturer-specific SDS, the manufacturer cannot be responsible for SDSs obtained from any other source.
