Manual
47
Service Department
Service Department, Telephone #603-332-2333.
Should your firearm require adjustment, repair or refinishing, we strong-
ly recommend that the firearm be returned to the factory. There is no other
way to ensure that the work will be done by a competent staff of trained tech-
nicians.
Firearms returned to the factory should be marked to the attention of the
service department. A letter of instructions should be enclosed to facilitate
handling. Firearms should be uncharged, disassembled and shipped via Unit-
ed Parcel Service (U.P.S.).
Our Service Department will give your firearm a complete inspection and
evaluate the problem. If the work required is not covered by our “Lifetime
Warranty” you will receive a quotation which must be authorized by you. No
actual work will be done without your approval.
Statement Of Liability
This gun is classified as a FIREARM OR DANGEROUS WEAPON and
is surrendered by us with the express understanding that we assume no liabil-
ity for its resale or unsafe handling under local laws and regulations. Thomp-
son/Center Arms assumes no responsibility for physical injury or property
damage resulting from either intentional or accidental discharge, or for the
function of any gun subject to influences beyond our control, and will honor
no claim which may result from careless or improper handling, unauthorized
adjustments, improper loading, use of improper powder or components, cor-
rosion or neglect.
For your protection, examine your firearm carefully at the time of pur-
chase. Fill out and mail the registration card promptly. Be certain that it bears
the firearm’s serial number which you will find on the receiver.
Thompson/Center does not approve or recommend any type of custom
conversion or alteration other than those performed by the T/C Custom
Shop. Muzzleloading firearms subjected to alteration are not covered by
our factory warranty. Responsibility for alterations rests totally with the
gunsmith or individual per
for
ming the work. The consumer is war
ned
that if such work is done improperly or without proper judgement, the
firearm can malfunction or rupture CAUSING INJURY AND/OR
DEATH TO THE SHOOTER OR BYSTANDERS AND DAMAGE TO
PROPERTY.