Manual

45
When using the cleaning jag,keep in mind that patch size and thickness are
important. Start with a patch that is approximately 2 1/2" square (or in diame-
ter). Position it over the jag as pictured in the illustration and try it in the bore
of the firearm (wet patches will enter more easily than dry ones). If it seems to
be too tight - don’t force it. If your trial patch proves to be too tight, use a small-
er size patch and/or thinner material.
A patch which is too small or thin will pull free from the jag teeth during
the cleaning process. Such “lost patches” can be quickly retrieved by use of the
worm (see illustration). Cleaning will go easier, however, if you establish and
maintain an optimum patch/jag/bore fit.
Thompson/Center does not package the worm with each firearm. This is an
optional tool and must be purchased separately (one size fits all calibers - see
current catalog). The worm is an extremely important muzzleloading tool and
every shooter should carry one in his implement bag. While its prime purpose is
to retrieve “lost patches”, it can also be used for field cleaning. To do so you sim-
ply catch the cleaning patch on the tines of the worm and push it into the bore
in the conventional manner.
The Rotating 
tines of the Worm 
will snag and 
retrieve patches 
lost in the bore. 
A Patch on the 
Worm may also be 
used for field 
cleaning.
Patch in Bore
Bore
Cleaning Jag
Patch Worm
The Cleaning Jag
threads onto the 
end of the 
ramrod.
The Patch Worm
threads onto the 
tapered end of 
the ramrod.
Position Patch 
over the end 
of the Jag.
Patch thickness 
requires 
judgement 
(see text).