Manual

10
ThunderHawk
®
Takedown Procedure
Remove ramrod
Remove these two screws
Ensure that the firearm you are working
with is unprimed and uncharged.
Lift the receiver and
barrel out of the stock
NOTE:
Unscrew receiver end cap, remove striker spring, remove striker handle retainer, slide striker handle out and remove striker from receiver.
The front trigger guard screw does
not have to be removed in order to
take the receiver and barrel out of the stock.
Red Dot marks "Fire" Position
Green Dot marks "Safety" Position
See page 9 for instructions that relate to this diagram.