Manual

5. 6.

6. Keeping pressure on the hammer with your thumb, pull the trigger with your

other hand. (Make sure that you have your thumb securely on the hammer and

you are applying pressure. The hammer is under spring tension and will come

forward with considerable force - you must contain it to avoid injury). Slowly

allow the hammer to come fully forward. You now have access to the area

behind the hammer for cleaning purposes. Note: When reinstalling the fire con-

trol assembly into the barrel/receiver assembly, you must cock the hammer and

put the safety in the “ON” position prior to assembly.

To remove the bolt from the barrel/receiver assembly, pull back on the

bolt operating handle until the bolt is located in the center of the receiver

(approximately

⁄2 way).

8. Holding the bolt operating handle in this position with one hand, reach in

with your thumb and forefinger of the other hand and grasp both ends of the

bolt. Lift the bolt straight out of the receiver.