Manual

Longer
Screw
In Back Hole
Shorter
Screw
In Frt. Hole
Bolt Spring
Trigger
Hammer
Bolt
Bolt Lock (Hold Open)
Safety
Trigger Guard
Magazine
Release
Magazine
1. Barrel/Receiver Assembly
with Fire Control Assembly
3. Trigger Guard 
Assembly
2. The Stock Assembly
1. Remove the front and rear trigger guard screws. Once the screws are
removed, pull the trigger guard assembly out of the stock.
The rear trigger
guard screw is longer than the front screw - remember this for re-assembly.
2. Next, lift the barrel/receiver assembly out of the stock. You have now disas-
sembled the rifle into its 3 major assemblies. Further disassembly will entail
removal of the fire control assembly and the bolt from the barrel/receiver
assembly.
3.
When removing the fire control assembly from the barrel/receiver
assembly
. Take out the front and rear fire control mounting screws on both
sides
of the receiver (four screws in all).
3.
4.
Remove the fir
e contr
ol assembly
. The hammer must be in the cocked posi
-
tion; the safety in the “ON” position.
5. If you want to lower the hammer (uncock), star
t by pr
essing down on the
hammer with your thumb until the safety moves by itself to the “OFF” position.
20
Fire Control
Assembly
Screw
Fire Control
Assembly
Screw