Manual

See the specific load recommendations on page 75 of this manual.

The steps in charging the cylinder bore models are as follows:

Step 1:

Pour a measured charge of FFG Black Powder (or “RS” Pyrodex) into

the barrel.

Step 2: Seat two T/C Natural Wads firmly against the powder charge.

Step 3: Pour a measured shot charge into the barrel.

Step 4: Seat one T/C Natural Wad)firmly against the shot charge. See illustra-

tion.

Care must be taken to install your choke tube correctly and maintain the

choke tube - in order to ensure the proper functioning of the tube.

Once again, the photo on page 66 shows a shooter in the process of load-

ing a muzzleloading shotgun.

Study this photo carefully and read all of the

captions before you proceed to charge your shotgun.

PHOTO B

Use one T/C 1/2" fiber wad

or two T/C Natural Wads

(placed together as one) over

the powder charge.

Start the wad or wads into

the muzzle with your fingers

as pictured.

Push the wad or wads down

flush with the muzzle.