Manual

55
This warranty does not cover “Kit models. While Thompson/Center
does guarantee the quality and workmanship of the parts contained in each kit
(and will replace any part which is proven, by our inspection, to be faulty in
either workmanship or material) we have no control over the final finishing
and assembly of these products. Therefore, no responsibility for either the con-
struction or use of kit models is implied or assumed. This warranty gives you
specific legal rights, and you may also have other rights which vary from State
to State. Address all correspondence and inquiries to:
THOMPSON/CENTER ARMS
P.O. Box 5002,
Rochester, New Hampshire 03866
Parts Lists available upon request. Specify model, caliber and serial
number.
Bullet Data For Thompson/Center
Muzzleloading Rifles
Round Balls
For T/C Firearms
.315" DIAMETER (47 grs.) Use with patch material No.7036,
No.7042, No.7131, or No.7135 in .32 caliber models.
.350" DIAMETER (65 grs.) Use with patch material No.7036,
No.7042, No.7131, or No.7135 in .36 caliber models.
.440" DIAMETER (127 grs.) Use with patch material No.7030,
No.7043, No.7132, or No.7136 in .45 caliber models.
.490" DIAMETER (175 grs.) Use with patch material No. 7030,
No. 7043, No.7132, or No.7136 in .50 caliber models.
.530" DIAMETER (230 grs.) Use with patch material No. 7034,
No. 7044, No.7133, or No.7137 in .54 caliber models.
.550" DIAMETER (265 grs.) Use with patch material No.7034,
No.7044, No.7133, or No.7137 in .56 caliber models.
.570” DIAMETER (279 grs.) Use with patch material No.7035,
No.7041, No.7134, or No.7138 in .58 caliber models.