Manual

53
Mounting A Scope
On The Thompson/Center
System 1
™
Do not drill additional holes in the barrel as this could weaken its structure
and contribute to a rupture CAUSING INJURY AND/OR DEATH TO
THE SHOOTER OR BYSTANDERS AND DAMAGE TO PROPERTY.
See the current T/C Catalog for scope mounting systems which can be used
on your System 1. The receiver is factory drilled and tapped for these acces-
sories.
Service Department
Service Department, Telephone #[phone].
Should your firearm require adjustment, repair or refinishing, we strong-
ly recommend that the firearm be returned to the factory. There is no other
way to ensure that the work will be done by a competent staff of trained tech-
nicians.
Firearms returned to the factory should be marked to the attention of the
service department. A letter of instructions should be enclosed to facilitate
handling. Firearms should be uncharged, disassembled and shipped via Unit-
ed Parcel Service (U.P.S.).
Our Service Department will give your firearm a complete inspection and
evaluate the problem. If the work required is not covered by our “Lifetime
Warranty” you will receive a quotation which must be authorized by you. No
actual work will be done without your approval.