Manual

12
Ensure that the firearm
you are working with
is unprimed and uncharged.
Unscrew the receiver end cap,
remove the striker spring,
remove striker handle retainer,
slide striker handle out and remove
striker from receiver,
Walnut Stock
Models
Red Dot
marks "Fire"
Position
Green Dot marks "Safety"
Position
Fixed
Trigger
Guard
Composite Stock
Models
Red Dot
marks "Fire"
Position
Green Dot marks "Safety"
Position
1
3
3
Remove the Breech Plug
Remove these two screws
Remove these two screws
7
6
Lift receiver and barrel out of the stock.
4
Remove Takedown Bolt
5
Remove Ramrod
2
System 1
™
Takedown Procedure
NOTE: Under no circumstances
should the trigger mechanism be
dis-assembled. Further disassem-
bly will void the warranty. If ser-
vice is required, contact the facto-
ry at [phone]. To re-assem-
ble the gun, reverse the procedure
listed here, making sure to check
for proper functioning of the trig-
ger, striker and safety mechanism
prior to loading and firing.