Manual

8
the dealer selling the device or the person or persons installing it.
26 Use Thompson/Center scope mounts only. The Thompson/Center
Catalog lists a series of scopes and mounts which are designed specifically
for use with our firearms. These mounts make use of existing screw holes.
Those who desire a scope sight should make use of Thompson/Center
mounts.
WARNING: Do not drill additional holes in the barrel as this
could weaken the barrel structure leading to a rupture. A ruptured bar-
rel can cause serious injury and/or death to the shooter or bystanders
and damage to property.
27 Follow Kit instructions carefully (where applicable).
A copy of this
booklet is included with all Thompson/Center factory finished muzzleloaders
- both kit and finished models. Readers who purchase kits must realize that
Thompson/Center Arms Co., Inc. has no control over the final finishing and
assembly of kit products. The kit builder must follow instructions to the let-
ter. Alteration of factory parts, the drilling of additional holes in the barrel,
excessive heat and/or removal of excess quantities of metal from the barrel or
breech plug can weaken the firearm or cause it to malfunction.
The foregoing general rules and cautions are printed to contribute to your
safety when using Thompson/Center muzzleloading firearms. These rules
must be read, understood and adhered to. The remainder of this book is
equally important. It contains information which is essential to the proper
use and care of your muzzleloading firearm.
Do not attempt to load or fire
your muzzleloading firearm until you have read this booklet in its
entirety.
If, after reading this booklet, you still have questions concerning
the safe use of your Thompson/Center firearm, write or call our Customer
Service Department at:
Thompson/Center Arms Co., Inc.
P.O. Box 5002
Rochester, New Hampshire 03866
Telephone: [phone]