Manual

43
Mounting A Scope
On The T/C Omega Muzzleloader
Do not drill additional holes in the barrel as this could weaken its structure
and contribute to a rupture CAUSING INJURY AND/OR DEATH TO THE SHOOT-
ER OR BYSTANDERS AND DAMAGE TO PROPERTY.
The barrel is factory drilled and tapped for T/C mounts. The (1-Piece) Weaver-Style
Mounts which are appropriate for this rifle are T/C Part No.9899 (Blue) and T/C Part
No.9907 (Silver). Follow the instructions that came with your scope mounts for proper
mounting of your scope. Questions should be addressed to our Service Department, at
Telephone #[phone].
Should your firearm require adjustment, repair or refinishing, we strongly recom-
mend that the firearm be returned to the factory. There is no other way to ensure that the
work will be done by a competent staff of trained technicians.
Firearms returned to the factory should be marked to the attention of the service
department. A letter of instructions should be enclosed to facilitate handling. Firearms
should be uncharged, disassembled and shipped via United Parcel Service (U.P.S.).
Our Service Department will give your firearm a complete inspection and evaluate
the problem. If the work required is not covered by our “Lifetime Warranty” you will
receive a quotation which must be authorized by you. No actual work will be done with-
out your approval.
Statement Of Liability
From Thompson/Center
This gun is classified as a FIREARM OR DANGEROUS WEAPON and is surren-
dered by us with the express understanding that we assume no liability for its resale or
unsafe handling under local laws and regulations. Thompson/Center Arms assumes no re-
sponsibility for physical injury or property damage resulting from either intentional or
accidental discharge, or for the function of any gun subject to influences beyond our con-
trol, and will honor no claim which may result from careless or improper handling, unau-
thorized adjustments, improper loading, use of improper powder or components, corro
-
sion or neglect.