Manual

42
Iron Sight Adjustment For The
T/C Omega Muzzleloader
T/C Omega muzzleloaders are equipped with one of two styles of standard rifle rear
sight (See Illustrations Below) which are adjustable for elevation and windage.
For Style 1 To adjust elevation, moving the elevation “blade” up or down changes
the point of impact. To do this, turn the Elevation Adjustment Screw clockwise (as viewed
from the receiver end) to lower the point of impact, and counter-clockwise, to raise the
point of impact.
To adjust the windage it is necessary to move the entire rear sight leaf left or right by
using the slotted screw head on the right side of the rear sight (as viewed from the receiv-
er end of the sight). Move the rear sight blade in the direction you want your shots to hit-
- (Example; Turn the screw clockwise - thereby moving the sight blade to the right, to
move your shots to the right and counter-clockwise to move the shots to the left).
Style 1
Some Models Have
A Rear Sight That
Looks Like This.
For Style 2 To adjust elevation, move the elevation slide up or down its ramp to
change the point of impact. To do this, turn the Elevation Adjustment Lock Screw counter-
clockwise (as viewed from the receiver end) to loosen it - then move the slide down the
ramp (using the graduation lines as a guide) to lower the point of impact.
To adjust the windage it is necessary to slide the rear sight blade assembly left or
right after loosening the Windage Adjustment Lock Screw. Move the rear sight blade in the
direction you want your shots to hit-- (Example; moving the sight blade to the right moves
your shots to the right and to the left move the shots to the left).
Style 2
Some Models Have
A Rear Sight That
Looks Like This.
Windage
Adjustment Screw
Elevation 
Adjustment
Screw
Windage Adjustment Lock Screw
Elevation Slide
Elevation Adjustment Lock Screw
Elevation
Ramp
Rear Sight 
Blade Assembly