Manual

41
Using Cleaning Implements
With Your Thompson/Center
Omega Muzzleloader
Thompson/Center muzzleloading rifles and pistols are supplied with a cleaning jag
which is the proper size for the particular caliber. For cleaning use commercial cleaning
patches (round or square) or pieces of discarded clothing.
When using the cleaning jag,keep in mind that patch size and thickness are impor-
tant. Start with a patch that is approximately 2 1/2" square (or in diameter). Position it
over the jag as pictured in the illustration and try it in the bore of the firearm (wet patch-
es will enter more easily than dry ones). If it seems to be too tight - don’t force it. If your
trial patch proves to be too tight, use a smaller size patch and/or thinner material.
A patch which is too small or thin will pull free from the jag teeth during the clean-
ing process. Such “lost patches” can be quickly retrieved by use of the worm (see illus-
tration). Cleaning will go easier, however, if you establish and maintain an optimum
patch/jag/bore fit.
Thompson/Center does not package the worm with each firearm. This is an option-
al tool and must be purchased separately (one size fits all calibers - see current catalog).
The worm is an extremely important muzzleloading tool and every shooter should carry
one in his implement bag. While its prime purpose is to retrieve “lost patches”, it can also
be used for field cleaning. T
o do so you simply catch the cleaning patch on the tines of
the worm and push it into the bore in the conventional manner.
The Rotating 
tines of the Worm 
will snag and 
retrieve patches 
lost in the bore. 
A Patch on the 
Worm may also be 
used for field 
cleaning.
Patch in Bore
Bore
Cleaning Jag
Patch Worm
The Cleaning Jag
threads onto the 
end of the 
ramrod.
The Patch Worm
threads onto the 
tapered end of 
the ramrod.
Position Patch 
over the end 
of the Jag.
Patch thickness 
requires 
judgement 
(see text).