Manual

23
ation other than those performed by the Thompson/Center Custom Shop. Re-
sponsibility for other conversions rests solely with the gunsmith performing
the conversion. If work is done improperly or without
proper judgement, the firearm can rupture or malfunction causing injury
and/or death to the shooter or bystanders and damage to property.
Service For Your G2 Contender
®
Should your handgun require adjustment, repair or refinishing, we strongly
recommend that the gun be returned to the factory. There is no other way to
ensure that the work will be done by a competent staff or trained technicians.
Guns returned to the factory should be
marked for the attention of the
service department
. A letter of instructions should be enclosed with the
gun. Adherence to these suggestions will prevent loss of time and facilitate
handling at the factory.
Our service department will give your firearm a complete inspection. They
will evaluate the problem or problems specified in your covering letter. If the
work required is not covered by our “Lifetime Warranty” (see page 25) you
will receive a
quotation which must be authorized by you.
Ship complete firearms or receivers via UPS.
Barrels only may be sent
Parcel Post as well as UPS.