Manual

nition manufacturer’s instructions for faulty ammunition, or, in any safe man-

ner. If the primer is not indented, or only lightly indented, you should imme-

diately return the G2 Contender to the factory for service or refer to a quali-

fied gunsmith for service.

Always keep the muzzle of your firearm pointed down range for at

least 30 seconds if the cartridge does not immediately fire after

pulling the trigger. The possibility of a “Hang Fire” (delayed ignition)

could exist, and a misdirected muzzle could lead to the bullet being

directed in a dangerous direction, thereby causing injury and/or

death to the shooter or bystanders and damage to property.

Carrying the G2 Contender

The G2 Contender Pistol or Rifle should never be carried, holstered

or cased in a loaded condition. See page 3 for general rules for the

safe use and handling of the G2 Contender.

Iron Sight Adjustment

Your G2 Contender has been targeted before shipment, however, some addi-

tional sight adjustment may be necessary to compensate for individual hold-

ing, sighting, etc.

To guard against accidental discharge which may cause injury or death, be

sure that the G2 Contender is unloaded and that the action is open when per-

forming this operation.

All barrels with adjustable sights:

On these models, all windage and elevation adjustments are made on the rear

sight only. Elevate (turn counterclockwise) the top screw to compensate for a

low group or reverse the procedure to compensate for a high group. Turning

the windage screw counterclockwise moves the point of impact to the left.

Turning the windage adjustment clockwise moves your group to the right.