Manual

19
4. Break open the G2 Contender relieving the tension on the hinge pin. Gently
tap the hinge pin out (from either side) with a suitable punch or screwdriver.
5. Using a suitable screw driver, remove the 3 screws in the grip cap, and in
turn remove the grip cap.
6. Insert a 3/16" allen wrench into the socket head of the grip draw bolt and
remove the grip bolt. Slide the grip off
7. No further disassembly is recommended or required.
The G2 Contender Rifle can be broken down into 4 major compo-
nents: 1. Butt Stock 2. Frame Assembly 3. Barrel 4. Forend - take-
down procedures follow those detailed above.
Cleaning the G2 Contender
®
Pistol or Rifle
Always make sure the chamber is empty prior to cleaning your G2
Contender. Working on a loaded firearm could result in an acciden-
tal discharge. An accidental discharge can result in injury and/or
death to the shooter or bystanders and damage to property.
Normal cleaning of the G2 Contender involves opening the firearm and run-
Rifle