Manual

17
The G2 Contender
®
Trigger
Always make sure the chamber of your G2 Contender is unloaded
prior to adjusting the trigger for over-travel. Working on a loaded
firearm could result in an accidental discharge which can result in
injury and/or death to the shooter or bystanders and damage to prop-
erty.
G2 Contender triggers are factory set. No adjustment should be required or
attempted. Alteration of the trigger spring or use of a non-factory spring can
create a dangerous trigger pull.
Too light a trigger
pull can cause premature firing which may cause injury and/or
death to the shooter or bystanders and damage to property
. Altered
parts may also produce an unsafe trigger pull. In no event should parts be
filed, honed, ground or replaced by non-factory parts.
Pistol
Rifle